Before coming up with this review, our team tested the plasma cutter for several weeks. We don’t base our reviews on what we read online because a lot of information is inaccurate. So, we prefer to do the assessment ourselves. That’s why you can count on our JEGS Plasma Cutter review. This plasma cutter is one of the best in the market.
We’re sure of this because we tested a good number of plasma cutters and shortlisted the best of them. This plasma cutter made the list, and that’s why we are reviewing it now. Also, it is important to remind you that we are not affiliated with any brand. We only introduce good products to the world.
So, the only reason that we’re reviewing this plasma cutter is its fantastic performance. What we noticed first are its smooth cuts. Even if you’re a learner, you should be able to make very smooth cuts with this cutting tool.
The device also impressed us when we used it to make some complex artistic cuts. Furthermore, the cutter is relatively lighter than many others that we’ve seen.
So, you should be able to move it around easily. If you do outside jobs, you’ll love this plasma cutter. Enough of the introduction. Can we get to the nitty-gritty of the review right away? Are you set? Okay, let’s go.
JEGS Plasma Cutter Review | 5 Major Features
1. This Plasma Cutter Makes Smooth Cuts
The most important feature of a plasma cutter is its ability to make smooth cuts easily. Every other feature is secondary. A metal-cutting tool is of little use if it does not cut metals smoothly and easily, regardless of other features that it may have.
That’s why we appreciate its ability to make smooth cuts. In addition, it can make complex cuts as well. By virtue of its design, you don’t have to be an expert to make wonderful cuts with this plasma cutter.
All you need is to read its user manual and you’re good. Some of our team members who never did any metalwork before were able to use it very well.
2. It is Relatively Lighter
This cutting machine weighs 22.5 pounds and that makes it lighter than many other plasma cutters. The major advantage of this feature is that you can easily move it around.
Sometimes you may have to carry out some metal works in different locations from your workshop. That’s when you’ll enjoy the lightness of the device. Moving it around will be much easier.
3. It Comes With a 1-Year Warranty
This review will be incomplete if we don’t mention that it comes with a 1-year warranty. That means if anything goes wrong with the tool within one year of purchase, it will be fixed or replaced for you free of charge.
We tried to find out among some of its users if the brand has been keeping its promise on warranty, but no one could give us a definite answer.
You know why? For most users, the device didn’t have any issue within their first year of purchase. It is a very strong device. Nevertheless, we’ll advise you to study the warranty terms to avoid unpleasant surprises.
4. The Tool is Sturdy and Strong
Remember, we mentioned that it didn’t have issues within the first year of purchase, so it’s not clear if any user has enjoyed the 1-year warranty. That’s probably because it is strong and rugged.
When you catch a glimpse of the tool and see how sturdy and strong it is, you’ll be sure that it’s going to be durable. And yes, it is. We came across some users that have been using it since 2016.
Durability is one of the factors we consider when rating a plasma cutter because nobody wants to spend a huge sum of money to purchase a piece of equipment and replace it after a few months. So, if durability is a top priority for you, try this plasma cutter.
So, it is needless to say that the high Amazon rating of this device means it is a good product. Having a rating of 4 stars makes it an excellent product. With this rating, you don’t need to wait for our recommendation.
How to Use JEGS Plasma Cutter?
Even if you’re a beginner, you should be able to use this plasma cutter easily. We found it very easy to use. Here are some of the steps that we followed to use it. You may as well follow the steps too.
Step 1: Read the user manual before you do anything. Make sure you’re clear with every section.
Step 2: Put on your protective gear like boots, a pair of jeans trousers, a jacket to cover your body, and a helmet to cover your eyes and face. Thankfully, this tool comes with a hand-held mask.
Step 3: Attach the ground clamp and turn on the air compressor.
Step 4: Plug the cutter in and switch it on.
Step 5: Adjust the current.
Step 6: Place the metal in the right position. You should be in the right position to cut it easily.
Step 7: Place the torch closer to the metal plate and press the button to begin cutting it.
Step 8: When you’re done, you should unplug the tool and disconnect the air compressor. After that, you should fold the hose properly before storing it.
Why Should You Use JEGS Plasma Cutter?
1. The Tool Supports Both 110V and 220V
Whether your power outlets give 110V or 220V, this plasma cutter will support it. With it, you don’t have to worry about tweaking your outlets. This also means you can use it anywhere there’s power within the United States. This has an advantage over cutting tools that support either only 110V or only 220V.
2. It is Well-Ventilated
If you have used a plasma cutter before, you’ll know that it radiates a lot of heat while in use. That’s exactly why the casing of this one has numerous ventilation slits. This will allow air to flow into it, keeping the system cool.
To support it, is a cooling fan that starts working once the device is on. Both features keep overheating at bay. In addition to the features, there’s an auto shut-down feature that shuts down the cutting machine when the temperature gets too high.
3. The Tool is Designed for Both Beginners and Professionals
Whether you’re a professional, a learner, or a hobbyist who just enjoys metalwork, you can use this tool easily. As mentioned earlier, some of our team members who aren’t metalwork experts were able to use it easily.
4. It Can Cut 3/8 Inch Thick Metals
This plasma cutter is able to cut metal plates that are up to 3/8-inch thick. Whether it’s steel, iron, or other metal materials, if it’s not thicker than 3/8 inch, this tool will do justice to it.
5. It has a Strong Carry Handle
We have already told you that the device is light enough to carry it around. Its strong carry handle makes it even easier to lift. Also, we noticed that the handle is tender and soft on the skin.
- This device comes with a 1-year warranty.
- It is sturdy, strong, and durable.
- You’ll use it to make smooth cuts.
- The tool is easy to use.
- It is ideal for beginners and experts.
- You can use it to cut metal plates that are up to 3/8 inch thick.
- It weighs only 22.5 pounds.
- Its casing is well-ventilated to keep the heat at bay.
- The cutting machine supports both 110V and 220V.
- Some users complained of air leaks.
FAQ – Frequently Asked Questions
Question 1: How heavy is it?
Answer: The device weighs 22.5 pounds.
Question 2: How does it take care of heat?
Answer: Its casing is ventilated and it has a cooling fan.
Question 3: Does it have any warranty?
Answer: Yes, it comes with a 1-year warranty.
Question 4: What is its power input?
Answer: It supports both 110V and 220V.
Question 5: I’m a learner. Can I use it?
Answer: Sure! It’s meant for both beginners and experts.
Final Verdict
If you’ve been following this JEGS Plasma Cutter review, you won’t need anybody’s recommendation to select it. We know you’ll love many of its features because we love them too. The most important one is its ability to make smooth and complex cuts, and that’s why we’ll recommend it.