If you’re a metal fabricator, you’ll understand that cutting and carving of metals are an integral part of your job. Unfortunately, metals are the toughest materials to cut, but not with a plasma cutter. The tool is a game-changer in metal fabrication. In other words, the tool is indispensable to all metalworkers.
However, there are many of them in the market and buyers find it a little challenging to make a choice. That’s why we decided to comb the market for all kinds of plasma cutters. We tested them all and selected the best of them.
Now, we have decided to review each of them separately. The plasma cutter being reviewed here is one of them. It is one of the best plasma cutters in the market. We didn’t just pick it at random. We tested it for several days. So, you can count on this Amico Cut-50 Plasma Cutter review.
The first thing we noticed about it is that it is designed for professionals, beginners, and hobbyists. So, if you’re just starting out as a metal worker, this plasma cutter should be at the top of your consideration list. You may also like its versatility. The tool cuts through all kinds of metals easily. Now, let’s dive into the heart of the review right away.
Amico CUT-50 Plasma Cutter Review | 5 Major Features
1. It has a Well-Ventilated Casing
One thing with plasma cutters is that they generate heat while being used. So, they usually get very hot. To prevent this one from getting hot, its casing is designed with a lot of ventilation slits for an adequate inflow of air.
So, no matter how long you use it, overheating won’t occur. Nevertheless, it is advisable to let it rest after using it for an hour.
2. Its Cutting Thickness Capacity is 1 Inch
The thicker a metal plate is, the more difficult it is to cut. That’s why every plasma cutter has its cutting thickness capacity. Unfortunately, many of them find it difficult to cut through any sheet of metal that is an inch thick or thicker.
Consequently, this one has been designed to cut metal plates that are 1 inch thick. We believe that it can also handle metals that are even thicker than 1 inch, but we can’t state for sure if it really does because the thickest piece of metal that we cut with the tool was 1 inch thick. Its cutting capacity is another reason why we selected this device.
3. The Plasma Cutter is Versatile
As a metal worker, you’ll deal with a wide variety of metals. That’s why you must have a plasma cutter that can cut through different metals. On that note, it might interest you that this plasma cutter is versatile. You can use it to cut all kinds of metals, and it will get the job done.
While testing it, we used it to cut copper, aluminum, mild steel, alloy steel, stainless steel, and other types of metal materials. And it performed creditably well. That’s why we are recommending it to you. No matter the metal, you can count on this plasma cutter.
4. It has a High Amazon Rating
When checking the performance of any product, we usually consider its current Amazon rating because the rating is given by the users of the product.
Users have no reason to lie or exaggerate the features of any product. If it’s a good product, they’ll give it a high rating, and if the product is low in quality, so will it rating be.
That’s why we are glad that the rating of this device is very high. It has an Amazon rating of 4.4 stars out of 5. When you test it, you’ll understand why it has a high rating. Generally, any product whose rating is higher than 2.5 stars is a good product. So, a plasma cutter that has a rating of 4.4 stars is way up.
5. It Adapts to 100-240V Input Power
Whether your power outlets generate 100V, 110V, or 220V, this device will handle it because it is designed for 100-240V. The huge advantage of this is that you won’t need to tweak your outlets. Also, power outlets all over the world generate power within the range of 100-240V.
So, you can use this plasma cutter in any country without bothering about the change in power input. Many plasma cutters support only 110V, while others work with 220V, but this one works with both.
How to Use Amico CUT-50 Plasma Cutter?
To use this plasma cutter, you must first get the following safety gear
1. You need to have a fire extinguisher available in case of sudden fire. You’ll be able to quench it quickly.
2. You need a laced pair of boots that will cover the whole of your feet, protecting them from dropping metals.
3. We suggest that you wear a pair of jeans to protect your legs.
4. A plasma helmet is important, too as it shields your face and eyes.
5. You have to use welding gloves to protect your hands.
6. Wearing a welding jacket will not be a bad idea too. It protects your torso and arms.
Steps Involved in Using The Plasma Cutter
Step 1: Put on all your safety gear.
Step 2: You should turn on your air compressor so that pressure can start building.
Step 3: Remember that plasma cutters radiate heat. So, it is necessary that you open the windows in your shop for ventilation.
Step 4: Place your metal in the right position and clamp it to your workbench. Ensure that your plasma cord is not under the metal because dropping metals could damage it.
Step 5: Draw your cut line with metal chalk.
Step 6: Attach the ground clamp.
Step 7: You can now plug in your Amico Cut-50 Plasma Cutter. You should also plug in your air hose. The plasma cutter must receive both power and air at the same time.
Step 8: Move the torch closer to the metal you want to cut.
Step 9: Press the button on the torch and begin to make the cut slowly, following the cut line you drew earlier.
Step 10: After cutting it through, allow the pieces of metal to cool before you pick them from the ground.
Why Should You Use Amico CUT-50 Plasma Cutter?
1. It is Suitable for Beginners and Professionals
The main reason why you should use this plasma cutter is that it is meant for both professionals and beginners. So, no matter your expertise level, you should be able to handle the plasma cutter and you’ll get a great cutting experience from it.
2. Its Noise Level is Low
The noise level of the plasma cutter is relatively low compared to many others. So, you can enjoy your cutting sessions quietly.
3. The Tool is Easy to Use
Even if you have not used a plasma cutter before, you should be able to use this one easily. It is very easy to use. Make sure you read the user manual before you begin to operate it.
4. It Can Cut All Kinds of Metals
Another reason to use this plasma cutter is its versatility. It can cut through all kinds of metals. This is an important feature because metal fabricators get to work on a wide range of metals.
5. The Device is Durable
The casing is sturdy and very strong. In fact, it is resistant to impact. All these features make for its durability. You don’t want to buy a plasma cutter that will be replaced in a few months. Many of its users have confirmed its durability.
- The plasma cutter is strong and durable.
- Its casing is well-ventilated to prevent overheating.
- When it gets too hot, it will shut down.
- The tool weighs 31 pounds, making it easy to carry it around.
- It has an Amazon rating of 4.4 stars.
- Both beginners and experts can use it.
- Its cutting thickness capacity is 1 inch.
- You can use it to cut all kinds of metals.
- Its noise level is low.
- The plasma cutter adapts to 100-240V input power.
- It is made in China and not in the United States.
FAQ – Frequently Asked Questions
Question 1: Where can I buy this plasma cutter?
Answer: It is sold on Amazon.
Question 2: How heavy is it?
Answer: It weighs 31 pounds.
Question 3: What is its power input?
Question 4: What is its amperage?
Answer: 50 amps
Question 5: What is its cutting thickness capacity?
Answer: It can cut up to 1 inch thick metals.
Based on the features discussed in this Amico Cut-50 Plasma Cutter review, we will recommend the product. It is ideal for both experts and beginners.
So, anyone can easily use it. Also, being versatile puts it ahead of many other plasma cutters. Its noise level is low, and it is durable. Finally, having a high Amazon rating confirms that it is a great product. So, we hereby recommend it.