Hobart 27i Plasma Cutter ReviewDon’t rush to buy a plasma cutter without reading this Hobart 27i Plasma Cutter review because you’re likely to choose it. We are reviewing it because we found several attractive features that could sway people’s decisions on it. The visual appeal of the machine is what attracted us first. On assessing it further, we discovered other great benefits, which we are going to discuss with you here.

To make this review comprehensive, we discussed five of its features extensively. Reading it will make you understand why each of the features is a benefit. In addition, we explained in brief how to use the machine. The section is meant for beginners reading this review.

To convince you of the quality of the product, we discussed some good reasons why you should use it. When you go through the points, you’ll agree with us because they are valid.

We also listed ten pros of the cutting machine and a con. Just before we gave our final verdict on the product, we gave answers to five of the most frequently asked questions about the plasma cutter.

We’re sure that after reading this review, you won’t have any more questions to ask about the product. So, let’s get to it right away.

Hobart 27i Plasma Cutter Reviews | 5 Major Features

1. This Device Runs on Dual Voltage

This heavy-duty cutting machine runs on two voltages. It works on both 120V and 240V. This gives it an advantage over units that work on a single voltage.

The real benefit is that you can use it in more locations. Here is a scenario that you should consider because it is a possibility.

What if you move into a new house or change your workshop and find out that the voltage of the new location is different from the one in your former location.

The change in the voltage could be from 120V to 240V or the opposite. You’ll have to either work on the power supply or change your plasma cutter. With Hobart 27i, you won’t have to worry. It supports both 120V and 240V.

2. It Cuts Through All Kinds of Metals

We tested this device with several types of metals and it was able to cut them all like cheese. You’ll love its versatility. Since you have no control over the types of metals that you will come across over the years of doing metalwork, it makes a lot of sense to get a versatile cutting machine like this one.

Imagine hitting a location for a huge task only to find out that your cutting tool cannot cut through the metals in the location. You’ll be embarrassed.

And your metalwork experience and expertise may be questioned. So, if you’re a professional, you need a plasma cutter that will deliver anytime and every time, regardless of the type of metal being cut.

3. The Tool has a Long Power Cord and Torch

Another thing that we love about this product is its long power cord. When you measure the length of its power cord, you’ll find out that it is 10 feet long. This means that you can plug it into an outlet that is up to 10 feet away.

Its torch is 12 feet long. Adding 10 feet to 12 feet, you’ll get 22 feet. With this tool, you can cut metals that are located up to 22 feet away from the nearest electric outlet.

Nothing frustrates people more than short power cords and short torches. Longer ones give you more room to operate. We appreciate the length of the cord and torch.

4. The Cutter Comes With Extra Consumables

You’ll love the fact that this plasma cutter comes with several accessories. It comes with two tips, an electrode, and a shield deflector. In other words, this appliance comes with all you need to make it work. Once you take delivery of it, you don’t need to buy anything until you run out of consumables.

5. It is Strong and Durable

No matter how good an appliance is, it is useless if you can’t use it for long. So, durability is an important factor in buying any product.  We found people who have been using this cutting machine for some years. A look at the cutter will convince you of its ruggedness and durability.

How to Use Hobart 27i Plasma Cutter?

When you want to use this device, make sure you take the time to study its user manual very well. Although it looks a little complicated, you will easily get the hang of it when you study the manual. You may also try to study its warranty terms to understand the terms and conditions.

Step 1: Wear your protective gear and open the windows of your shops. It radiates a lot of heat, so proper ventilation is required.

Step 2: Attach the ground clamp.

Step 3: Connect the torch.

Step 4: Plug it into the nearest receptacle.

Step 5: Put the metal to be cut in the right position and fasten it to prevent it from moving while being cut. It is also good to shut the door of your shop to prevent anybody from rushing in and startling you while using the tool.

Step 6: Switch on the outlet. Turn the device on, and press the button on the torch. Take it closer to the metal and begin to cut it gently until you cut it through. At this point, you need 100% concentration and zero distraction.

Step 7: When you’re done, take the time to unplug it from the outlet and remove the torch and store it for another day.

Why Should You Use Hobart 27i Plasma Cutter?

1. This Product is Easy to Use

Ease of use is an important factor in buying any product. You don’t want to buy a super-sophisticated machine that you’ll be struggling to understand. So, we always choose an appliance that is fairly easy to use.

The cutting tool being reviewed is not an exception. It looks a little complex, but it’s quite easy to understand. Take it as a rule of thumb to always read manuals before using any appliance.

2. Its Casing is Well-Ventilated

This cutting unit radiates a lot of heat while being used and that’s normal. So do other plasma cutters. To mitigate the heat is the numerous ventilation slits that come with the casing of this plasma cutter.

That will keep the heat at bay. In addition to that is its auto-shutdown feature.  When the temperature of the system rises too high, it will go off automatically. When it does, please leave it for at least 30 minutes to cool before you turn it on.

3. Buyers will Enjoy Some Years of Warranty

This device comes with a 5-3-1 warranty. By its description, this warranty seems a little confusing. That’s why you should take the time to study the terms before using it.

4. It Makes Fine Cuts

A good reason to try this plasma cutter is its smooth, clean, and fine cuts. If you are in need of precise and accurate cuts, you can count on this device.

5. The Tool has a High Amazon Rating

This cutting unit has earned an Amazon rating of 4.3 stars. It is definitely a great product. Remember, the rating was given by the users of the product.

Product Benefits
  • This device comes with a certain warranty.
  • It weighs only 32.1 pounds.
  • You can use it for fine and accurate cuts.
  • It can cut through virtually all kinds of metals.
  • You’ll find extra consumables in its pack.
  • Having an Amazon rating of 4.3 stars is commendable.
  • Its power cord is 10 feet in length.
  • Its torch is 12 feet long.
  • The casing of the cutting machine is well-ventilated.
  • It is strong and durable.
The Negative Things
  • It costs about $1,750, and that makes it rather expensive.

FAQ – Frequently Asked Questions

Question 1: What is its voltage?

Answer: The unit supports both 120V and 240V.

Question 2: How heavy is it?

Answer: Its weight is 32.1 pounds.

Question 3: How long is its power cord?

Answer: Its power cord is 10 feet in length.

Question 4: How long is its torch?

Answer: The torch is 12 feet long.

Question 5: Where can I buy it?

Answer: You can get it on Amazon.

Final Verdict

It is necessary to remind you that the Hobart 27i Plasma Cutter review is based on what we found out after testing it. So, you can bank on it.  The device makes accurate and fine cuts, and it is quite easy to operate. When you open it, you’ll find extra consumables in its pack.

Even though it is tough, rugged, and durable, it comes with a warranty. We understand that its price is on the high side, but we’ll still recommend it because it offers more value than the price.