Have you been searching online for a good plasma cutter? You’re on the right page. We have reviewed some of the latest small plasma cutters here.
We tested and reviewed them based on what we found out about the devices. This should save you several hours of online search. We expect you to choose one of them after going through the whole report.
Our Picks of 10 Best Small Plasma Cutter Reviews:
1. Lotos LTPDC2000D Non-Touch Pilot Arc Plasma Cutter
This is another plasma cutter that we trust. It will cut through aluminum, copper, mild steel, alloy steel, stainless steel, and many other materials. It has a pilot arc feature that makes it possible to cut metals without any physical contact. That way, the tip of the plasma cutter will last for a long time.
It runs on a dual voltage, and it comes with a 1-year warranty. The sturdy casing of this cutting machine is well-ventilated, and it has a very effective cooling fan. The noise level of this device is pretty low. You can easily carry it around with its strong carry handle.
It has a current meter and an air pressure gauge. It requires no assembly. Even if you’re new to metalwork, you should be able to handle this device as long as you read the user manual.
Some of the accessories in its box are a tag torch, a plasma-cutting torch, a ground clamp, and an air filter regulator. You can be sure of its durability. The device can also work as a welding machine. It has an Amazon rating of 4.4 stars.
Features
- This plasma cutter is sturdy and strong.
- It also works as a welder. You only need to change the cutting tip to a welding tip.
- Users have confirmed its durability.
- Its noise level is very low.
- The device is easy to set up.
- You can easily carry it around with its carry handle.
- An Amazon rating of 4.4 stars is great.
- It has a 1-year warranty.
- There’s an in-built cooling fan that keeps it cool.
- It has a current meter and air pressure.
2. Small Plasma Cutter, 50A Inverter AC-DC IGBT Dual Voltage (110/220V)
What sets this plasma cutter apart from the others is its high duty cycle, as well as its maximum thickness cutting capacity. We were stunned when we found out that this masterpiece has a duty cycle of 85%. Also, it can cut a piece of a metal plate that’s as thick as 20mm.
The efficiency of the cutting machine is 80%. From its current meter, you’ll find out that its amperage is 50 amps. It runs on a dual voltage. The cuts are clean and encouraging.
We used it to cut a wide variety of metals, and it performed creditably. Whether it is aluminum, copper, mild steel, alloy steel, or stainless steel, just bring it over. This machine will do justice to it.
Its casing is strong, and it is ventilated. Although it weighs 21.3 pounds, you can easily carry it around with its carry handle. If you go for this one, you’ll enjoy a 3-year warranty. Finally, it has an Amazon rating of 4.5 stars. If you don’t like the product, you can return it within 30 days of purchase and get a full refund.
Features
- This plasma cutter works on a dual voltage.
- Its duty cycle is 85%.
- The efficiency of the unit is 80%.
- Its maximum thickness cutting capacity is 20mm.
- You can use it for a wide range of metals.
- It weighs 21.3 pounds.
- The product comes with a 3-year warranty.
- Its casing is properly ventilated.
- The amperage of the plasma cutter is 50 amps.
- It has an Amazon rating of 4.5 stars.
3. VIVOHOME 3 In 1 Multi-functional Plasma Cutter
You can use this tool for both welding and cutting. This is why it is a must-have for metalworkers. Its sturdy frame has enough slits for ventilation.
On top of that, there’s a cooling fan that keeps warding off the heat. Since it has a pilot arc torch, it does not have to make contact with the metal plate before cutting it.
It can handle plates that are thicker than 8mm. You don’t have to be an expert to be able to use the device. Its duty cycle is 60%. The plasma cutter weighs 41.1 pounds, and that’s why it has a strong handle for lifting. There’s a current meter that displays its current all the time. Finally, it has an Amazon rating of 4.4 stars.
Features
- This plasma cutter is sturdy and strong.
- It also works as a welder. You only need to change the cutting tip to a welding tip.
- Users have confirmed its durability.
- Its noise level is very low.
- The device is easy to set up.
- You can easily carry it around with its carry handle.
- An Amazon rating of 4.4 stars is great.
- It has a 1-year warranty.
- There’s an in-built cooling fan that keeps it cool.
- It has a current meter and an air pressure.
4. Forney 317 250 P+ Plasma Cutter with Air Compressor
The distinctive color of this plasma cutter will attract you first before you discover its other features. We found it to be one of the easiest cutting machines to operate.
The device is protected from overloads, high voltage, high current, and short circuits. When any of them occurs, it will shut down.
The cutter can cut through several kinds of metals. Its amperage is 15 amps. It has three diagnostic lights that will guide you when there’s a problem with it. A weight of 40 pounds is fair.
That’s why its carry handle is very strong. The device is generator-friendly. So, you can use it in a location that lacks electricity. The device has an Amazon rating of 3.7 stars.
Features
- This plasma cutter weighs 40 pounds.
- Its frame is very strong.
- You can be sure of its durability.
- The device is relatively quieter than the others.
- This unit is easy to use.
- Its carry handle is for easy lifting.
- It has an Amazon rating of 3.7 stars.
- The amperage of the unit is 15 amps.
- The device is protected from overloads and short circuits.
- It has three diagnostic lights.
5. Pilot Arc Plasma Cutter, Cuwiny 50 Amp Dual Voltage 110/220v
This cutting device runs on a dual voltage. It is suitable for cutting all kinds of metals like aluminum, copper, mild steel, alloy steel, and stainless steel. The product comes with a limited 1-year warranty.
With its non-touch pilot arc cutter, it does not have to make any contact with the metal plate before it cuts through it. This helps to extend the life of the consumables.
Its duty cycle is 60%. The device has an Amazon rating of 4.1 stars. It is well-ventilated and it has a built-in cooling fan. You’ll love its current meter that is beside the air pressure gauge.
It weighs 22.5 pounds, but it also has a strong handle with which you can carry it around easily. Its maximum cutting thickness capacity is 16mm. It is easy to set up, and we have been able to confirm its durability as well.
Features
- This product is sturdy and strong.
- Its duty cycle is 60%.
- It has a pilot arc cutting feature.
- The maximum cutting thickness capacity of the device is 16mm.
- The device is easy to set up.
- It comes with a 1-year warranty.
- You can easily carry it around with its carry handle.
- It has an Amazon rating of 4.1 stars.
- There’s an in-built cooling fan that keeps it cool.
- It has a current meter and an air pressure.
6. Forney Easy Weld 251 20 P Plasma Cutter
When something is wrong with this plasma cutter, it will indicate with its light. So, you should know what every light indicator is saying. When you see a flashing red light, it means one or more consumables are not properly placed.
Low air pressure will elicit a flashing yellow light. When the duty cycle is exceeded, a solid yellow light comes on. Finally, a flashing green light is for low input power.
Also, you can use it to cut all kinds of metals. It produces smooth and accurate cuts. While testing the product, we also noticed that its casing is strong and sturdy.
So, we’re sure that the unit will be durable. Its weight of 21.1 pounds makes it fairly portable. Also, it is very easy to use. Even if you’re a learner, you should be able to make nice cuts with the device.
Its amperage is 20 amps. To prevent overheating, the casing of the cutting machine has a lot of ventilation slits for internal airflow. It is also protected from high voltage and high current. The plasma cutter comes with a 1-year warranty. Finally, it has an Amazon rating of 4.6 stars.
Features
- This cutting device has a very strong casing.
- The case has a strong handle for carrying it around.
- It has light indicators that will alert you when there’s a problem.
- The product comes with a 1-year warranty.
- The case of the device is resistant to rust and corrosion.
- We have confirmed its durability.
- Its amperage is 20 amps.
- A weight of 21.1 pounds is just fine.
- It is easy to operate.
- An Amazon rating of 4.6 stars is perfect.
7. Hobart AirForce 40i Plasma Cutter
This cutting device supports a dual voltage. The cooling fan of the cutting machine only starts working when its temperature gets to a certain level. This helps to reduce its power consumption. The cutting device has an amperage of 40 amps. Its duty cycle is 60%.
The device weighs 25.9 pounds. You should be able to carry it with its strong carry strap. It does not require any setup. Also, even a learner can handle it. The noise level of the plasma cutter is very low.
The unit is protected from high voltage, high current, overloads, and short circuits. Its strong casing is resistant to rust and corrosion. It is durable, and it has an Amazon rating of 4.5 stars.
Features
- This cutting device has a smart cooling fan that works only when the unit gets too hot.
- This plasma cutter is sturdy and durable.
- We have confirmed that it is durable.
- The device has a low noise level.
- It is easy to set up.
- You can easily carry it around with its carry strap.
- It has an Amazon rating of 4.5 stars.
- The unit has an amperage of 40 amps.
- Its casing is resistant to corrosion and rust.
- The unit is protected from short circuits, overloads, and more.
8. SUPER DEAL DC Inverter Small Plasma Cutter
What we like most about this device is its very low noise level. A cooling fan and a well-ventilated casing will keep the heat level low. The device is made of heavy-duty iron, so it is very strong and tough. It is also durable. Some of its users have been using it for years.
The plasma cutter seems to be designed with learners in mind. So, professionals and learners can easily use the device. It has a clear display unit that shows its current.
The display unit is actually a current meter. This cutting machine produces great cuts with little effort. It is protected from overheating, low voltage, high voltage, and short circuits.
The product comes with several accessories that include a face mask. It weighs 24.4 pounds and has a rating of 4.4 stars on Amazon.
Features
- This device is made for professionals and learners.
- It also has an air pressure gauge.
- The current rating of the device on Amazon is 4.4 stars.
- The device is protected from overheating, low voltage, high voltage, and short circuits.
- Its casing is well-ventilated.
- You can easily monitor its current through the current meter.
- It has a sturdy and strong frame/casing.
- A weight of 24.4 pounds is okay.
- Its cooling fan takes care of the heat.
- The noise level of the unit is quite low.
9. HeroCut 35i Single Phase 110V
The input voltage of this fan-cooled cutting machine is 110 volts. It is suitable for all kinds of metals like aluminum, copper, mild steel, alloy steel, and stainless steel. The device comes with a 1-year warranty.
With an amperage of 30 amps, it can cut a metal plate that is up to 8mm thick. Its duty cycle is 60%. The casing of the cutter is well-ventilated. The tool comes with numerous accessories.
It has an Amazon rating of 4.2 stars. Weighing 12.82 pounds makes this cutting machine one of the lightest in the market. Nevertheless, it comes with a strong handle for easy lifting. The noise level of the product is quite low.
It is strong and durable. In addition, it is protected from short circuits, overloads, and high voltage. Don’t plug it into a 220-volt outlet because it supports only 110 volts.
Features
- This unit supports only 110 volts.
- You can easily carry it around with its carry handle.
- Users have confirmed its durability.
- It weighs 12.82 pounds.
- This plasma cutter is sturdy and strong.
- It has an in-built cooling fan.
- The device is easy to set up.
- Its noise level is very low.
- The unit has an Amazon rating of 4.2 stars.
- Buyers of this cutting machine will enjoy a 1-year warranty on it.
10. Hypertherm 088079 Powermax30 XP
This cutting device literarily has a paperweight. When we saw that it weighs only 2.2 pounds, we never expected it to perform. But it exceeded our expectations in all aspects. We are highly impressed with the weight of the product.
Another winning feature of the unit is that it supports a voltage bracket of 110 volts to 240 volts. This means that you can use it in different countries. It comes with a carry case and a shoulder strap to make it easy to carry around. Apart from both accessories, it comes with other accessories too.
Another feature that you’ll love is its low noise level. It has a maximum cutting thickness capacity of 16mm. It makes great cuts, and you don’t have to be an expert to be able to use the device. It has an Amazon rating of 4.6 stars.
Features
- This cutting device is easy to set up.
- It weighs only 2.2 pounds.
- Its noise level is very low.
- The cutting machine supports a voltage bracket of 110 volts to 240 volts.
- It comes with a carry case and shoulder strap.
- This plasma cutter makes smooth and clean cuts.
- It is durable.
- You can easily carry it around with its carry handle.
- It has an Amazon rating of 4.6 stars.
Buying Guide – How to Choose The Best Small Plasma Cutter?
If you’re planning to purchase a plasma cutter soon, we’ll advise you to apply the tips provided here.
1. Select One from This List
We can assure you that the cutting devices reviewed above are the best in the market right now. Anyone who purchases any of them will enjoy it. They have all you may be looking for in a cutting tool. So, we recommend the ten of them. Pick one of them whenever you’re ready to purchase a plasma cutter. We’re sure that you’ll thank us later.
2. Buy it from Amazon
The second tip is to purchase it from Amazon. Of course, you can get good plasma cutters from other stores, but we’re recommending Amazon. Any product that you buy from the platform comes at a competitive price. Also, you’ll enjoy a 30-day return window on your cutting unit. This implies that you have up to 30 days to return any product that you don’t like.
3. Take Advantage of the Return Window
Even if you’re not ready to use your cutting tool, it is better to test it a couple of times before you store it away. So, if anything is wrong with it, you’ll be able to return it and get a full refund.
4. Ensure The Accessories are Complete
All the cutting devices listed here come with numerous accessories. Unfortunately, it is possible for certain accessories to be missed out while packing your order. You may not realize it until the day that you need the missing component. That’s why you should check the accessories immediately after receiving your package.
5. Always Read The User Manual
You must read the user manual of your cutting tool before you start using it. This tip is very important.
Final Word
We want to assure you that the products we reviewed above are the top small plasma cutters. Anybody who buys any of them will enjoy it. They are easy to use, and they are durable.
These tools make cool cuts that do not require polish. The cutters are for both experts and learners. To wrap it up, they are affordable, and they have a high Amazon rating. So, we recommend them all.
